Call +44 (0) 1179 666 761 or email info@besrehab.net to speak to our specialist team

The OB head pad is the most basic head support from Stealth and is specially designed for users with good head control.

The robust moulded design provides support for the occipital area of the head. This model is designed to be used without a cover and can be easily wiped down for cleaning. 

The head support is available in two profile options, large or small. The large head pad has a higher profile and supports both the occipital and the sub-occipital areas of the head, and the smaller model supports the occipital part only.

This head support is compatible with all of Stealth’s mounting options and can be fitted with any of their accessories such as facial pads or egg switches.

 

To order, Call +44 (0) 1179 666 761 or email info@bescorporate.net

Fill out the Quote/Order Form and send it to us on info@bescorporate.net

Order Codes

Benefits

Highly Adjustable

The OB head support includes a ball mount at the back of the head support that  can be adjusted to sit at any angle and then fixed into place. If a different angle is needed at a later date the ball-mount may be loosened and re-adjusted.

Easy to clean

The OB Head Support is designed to be used without a cover, and has a wipe-down finish for easy cleaning.

Discreet Support

The OB head support has a small bulk, which gives it a discreet appearance when worn.

Decision Guide

Dimensions of the OB

OB Lw

 

 

 

Description Length Width
Small 3.5" (9cm) 9.0" (23cm) 
Large 5.5" (14cm) 9.0" (23cm)

Mounting Hardware Options

Head Support Mounting 1FDM

 

 

 

 

 

 

 

 

 

 

 

 

HMO400-1

1" Ball Joint, Straight with 12..8mm square tubing. 

The square stem HMO400 is a standard straight mounting hardware that contains can be adjusted in vertical and horizontal planes. The head pad affixes to a ball joint that can be rotated to suit different head positions and angles.

HMO475-1

1" Ball Joint, Multi-axis with 12.8mm square tubing.  

The square stem HMO475 is a mount that can be adjusted to move forward, backward, and on a vertical plane. This mount features a curved vertical bar that rotates to accommodate asymmetrical postures, and a horizontal bar that can be rotated left or right of midline to suit a variety of head angles. 

TWB480-1

1" Ball Joint, Link Hardware with 19mm Round tubing. 

The round stem TWB480-1 mount features articulated links that can be added to or removed to suit almost any posture. Inline or offset links may be added for a variety of head heights and angles. The stem includes a mounting triangle that can be rotated to accommodate asymmetrical postures, and a ball joint to suit head angle adjustment.

TWB485-1

1" Ball Joint, Link Hardware with 12.8mm Square tubing.

The square stem TWB485-1 combines the articulating links of the TWB480 and the curved bar of the HMO475 to create a mount that can be adjusted to suit even the most unusual of postures. The head pad affixes to a ball mount, which can be rotated to suit different head positions and angles.

TWB486-1

1" Ball Joint, Link Hardware with 15mm Square tubing.

The square stem TWB486-1 is similar to the TWB485-1, but with a 15mm square tubing. 

TWB480-1FDM

1" Ball Joint, Link Hardware with 19mm Round tubing and Flip down mount. 

The TWB480-1FDM is a round link hardware with a flip down mount that allows the head pad to be flipped down out of the way when it is not needed, without having to demount it from the chair. This is unique to Stealth and helps for easy transfers without losing any adjustments. After being used, the mount can be clicked back into the original position, easily.

TWB486-1FDM

1" Ball Joint, Link Hardware with 15mm Square tubing and Flip down mount.

The TWB486-1FDM has the same features to the TWB485-1FDM but with a  square stem.

Mounting Adapter Plates

Head Support Adaptor PlatesThe Head Pad fits almost all wheelchairs. Specialist adapter plates are available to fit the mounting bracket to pre-drilled holes on specific chairs such as those produced by JCM, Invacare, R82, Leckey and Active Design. 

Additional Mounting Hardware Options

 

Mounting BracketMounting Bracket

Mounting Bracket is always provided with a mounting stem. The use of a mounting bracket is to attached the stem to the seat back support. Purchasing a spare mounting bracket is advisable when you wish to transfer your head support from one seat to another, for example.

 

 

 

 

LinksLinks

Links are essential while setting the right distance of your head pad from the back support. Depending on the distance, extra standard or offset links can be added or removed. The offset link can be used to smooth the link and ensure the head pad is placed at the shortest distance from the back support. 

Please Note: Links can only br added to the TWB range of mounting hardware

 

 

 

Tone Deflector

Tone Deflector

The Tone Deflector is a great addition to a head pad. It is designed for clients with extensive muscle tone, and acts as a great means of absorbing some of the energy of the head going backwards. This device absorbs quick impact compression and diverts angled loading. It offers 10 degree deflection of high tone impact in any direction. It is easy to assemble and is attached at the back of the head pad, making it discreet for the user.

Select Headpad

Size

Your product code:

Select Mounting Hardware Stem

Type

Your product code:

Select a Mounting Adapter Plate (if needed)

Chair Type

Your product code:

Select Additonal Mounting Hardware Options (if needed)

Mounting Hardware

Your product code:

Relevant Articles

Other Resources

Other Resources

© 2018 BES Rehab Ltd

BHTA-ISO-9001
BHTA-Logo