Call +44 (0) 1179 666 761 or email info@besrehab.net to speak to our specialist team

Tri-Comfort Plus Head Support

The Tri-Comfort Plus is a head support with 3 Comfort pads built into it.

It offers occipital support along with lateral pads that give lateral support to the head. It offers multi-axis adjustability at the ball joint of the mounting hardware, while lateral pads provide a degree of contouring to support the head.

To order, Call +44 (0) 1179 666 761 or email info@bescorporate.net

Fill out the Quote/Order Form and send it to us on info@bescorporate.net

Order Codes

Benefits

Contoured Support

The three pad support within the Tri-Comfort Plus ensures that the client is not only comfortable but is also laterally supported by the head pad.

Superior Comfort

Two foams of different resistances are used to offer a premium amount of comfort, cushioning, and support.

Multi-axis Positioning

The Comfort Plus head support has a 1" ball mount between the mounting stem and the pad, which allows for multi-axis positioning and angling to suit any head position.

Decision Guide

Dimensions of the Adjustable Comfort Plus Pad

Tricomfort Lw

 

 

Description A B C
Niño Extra Small 3.7" (10cm) 3.7" (10cm)  3.0" (8cm) 
Niño Small 4.7" (12cm)  4.5" (12cm)  3.5" (9cm) 
Small 5.2" (13cm)  6.2" (16cm)  3.7" (10cm) 
Medium 5.2" (13cm)  6.5" (17cm)  5.2" (13cm) 
Large 5.2" (13cm)  8.0" (20cm)  7.2" (18cm) 

Mounting Hardware Options

Head Support Mounting 1FDM

 

 

 

 

 

HMO400-1

1" Ball Joint, Straight with 12..8mm square tubing. 

The square stem HMO400 is a standard straight mounting hardware that contains can be adjusted in vertical and horizontal planes. The head pad affixes to a ball joint that can be rotated to suit different head positions and angles.

HMO475-1

1" Ball Joint, Multi-axis with 12.8mm square tubing.  

The square stem HMO475 is a mount that can be adjusted to move forward, backward, and on a vertical plane. This mount features a curved vertical bar that rotates to accommodate asymmetrical postures, and a horizontal bar that can be rotated left or right of midline to suit a variety of head angles. 

TWB480-1

1" Ball Joint, Link Hardware with 19mm Round tubing. 

The round stem TWB480-1 mount features articulated links that can be added to or removed to suit almost any posture. Inline or offset links may be added for a variety of head heights and angles. The stem includes a mounting triangle that can be rotated to accommodate asymmetrical postures, and a ball joint to suit head angle adjustment.

TWB485-1

1" Ball Joint, Link Hardware with 12.8mm Square tubing.

The square stem TWB485-1 combines the articulating links of the TWB480 and the curved bar of the HMO475 to create a mount that can be adjusted to suit even the most unusual of postures. The head pad affixes to a ball mount, which can be rotated to suit different head positions and angles.

TWB486-1

1" Ball Joint, Link Hardware with 15mm Square tubing.

The square stem TWB486-1 is similar to the TWB485-1, but with a 15mm square tubing. 

TWB480-1FDM

1" Ball Joint, Link Hardware with 19mm Round tubing and Flip down mount. 

The TWB480-1FDM is a round link hardware with a flip down mount that allows the head pad to be flipped down out of the way when it is not needed, without having to demount it from the chair. This is unique to Stealth and helps for easy transfers without losing any adjustments. After being used, the mount can be clicked back into the original position, easily.

TWB486-1FDM

1" Ball Joint, Link Hardware with 15mm Square tubing and Flip down mount.

The TWB486-1FDM has the same features to the TWB485-1FDM but with a  square stem.

Mounting Adapter Plates

Head Support Adaptor PlatesThe Head Pad fits almost all wheelchairs. Specialist adapter plates are available to fit the mounting bracket to pre-drilled holes on specific chairs such as those produced by JCM, Invacare, R82, Leckey and Active Design.

Additional Mounting Hardware Options

Mounting Bracket

 

 

 

 

 

 

 

 

 

 

Mounting Bracket

Mounting Bracket is always provided with a mounting stem. The use of a mounting bracket is to attached the stem to the seat back support. Purchasing a spare mounting bracket is advisable when you wish to transfer your head support from one seat to another, for example.

Links

 

 

 

 

 

 

 

 

 

 

 

Links

Links are essential while setting the right distance of your head pad from the back support. Depending on the distance, extra standard or offset links can be added or removed. The offset link can be used to smooth the link and ensure the head pad is placed at the shortest distance from the back support. 

Please Note: Links can only br added to the TWB range of mounting hardware

Tone Deflector

 

 

 

 

 

 

 

 

 

 

Tone Deflector

The Tone Deflector is a great addition to a head pad. It is designed for clients with extensive muscle tone, and acts as a great means of absorbing some of the energy of the head going backwards. This device absorbs quick impact compression and diverts angled loading. It offers 10 degree deflection of high tone impact in any direction. It is easy to assemble and is attached at the back of the head pad, making it discreet for the user.

Select Head Pad

Size

Your product code:

Select Mounting Hardware Stem

Type

Your product code:

Select a Mounting Adapter Plate (if needed)

Chair Type

Your product code:

Select Additonal Mounting Hardware Options (if needed)

Mounting Hardware

Your product code:

Relevant Articles

Other Resources

Other Resources

© 2018 BES Rehab Ltd

BHTA-ISO-9001
BHTA-Logo