Carbon Fibre Back Support

Benefits
Decision Guide
Build Your Order Code

The Carbon Fibre shell is extremely lightweight, and can fit chair widths ranging from 13” to 19” with +/- 1” width adjustability depending on mounting hardware.

The weight of a 16” standard back is well under 400 grams which makes it an ultralightweight back support.

In the Carbon Fibre range, ADI offers three lengths - Low, Medium, or Standard. Carbon fibre back supports are available from sizes 13" to 19" in Active and Deep Contours. This back support comes with a choice of mounting hardware such as Fixed ELITE, Width Adjustable ELITE, 2 Point PRO, and Quick Release.

Please Note: Deep contour not available in 19" size.

To order, Call +44 (0) 1179 666 761 or email info@beshealthcare.net

Fill out the Quote/Order Form and send it to us on info@bescorporate.net

Order Codes

View large image

Benefits

Ultralightweight

ADI Carbon Fibre back supports are made from a carbon fibre shell which makes them ultralighweight. For example a standard 16" ADI Carbon Fibre back support weighs less than 400gms. Since these back supports are super light, they are an excellent option for self-propellers.

Range of options

ADI Carbon fibre back supports are available in a huge choice of sizes from 13" to 10" in low, medium, and standard lengths depending the size of back support. The ADI Carbon fibre range comes in different contours catering to different users, such as active and deep.

Durable and Crashworthy

ADI back supports have exceeeded 35,000 cycles of durability testing without failure. Crashworthiness tests of ADI back supports were conducted in accordance with ISO 16840-4. The results of this testing showed that ADI backs support mounting hardware installed on the ISO wheelchair base met all applicable criteria proposed in section 5.1.2 of 16840-4.

Mounting Hardware

Fixed and Width Adjustable ELITE

The Fixed ELITE option provides stationary mounting with fixed positioning, and is designed to maximise user energy conservation.

Similar in design to the Fixed ELITE, the Width Adjustable ELITE comes with the added benefit of width adjustment, for easier mounting onto rigid chairs, as these chairs often do not have standardised widths.

2 Point PRO

The 2 Point PRO mounting hardware is a stationary mounting option which offers angle, depth, and width adjustment for manual, rigid, and power chair users.

Quick Release

Quick Release mounting hardware is an option which offers angle, depth, and width adjustment, but with the added benefit of a quick release mechanism.

Decision Guide

Measuring for a Carbon Fibre Back Support

The width of each ADI Back Support is determined by measuring the chair width from the outside to outside of the back post tubing.Example of the measurement required to select an ADI Back Support Shell Note: If you wish the back support to fit between the chair’s back posts, you will need to select a shell size that is narrower than the ‘A’ dimensions shown, and will depend on the diameter of the back posts.